6 Points to Keep in Mind While Installing a Split Air Conditioner
Installing a split air conditioner is quite a task. It needs professional expertise and a well-trained AC installation service provider can be a big help. If the appliance is installed properly, it would provide optimum cooling in no time. Moreover, it would save big on energy bills and repair/maintenance charges. So if you’re searching for AC installation, Palm Beach (Florida) is the place you must visit.
While installing a split air conditioner, you must consider the following factors-
1. Wall strength
One of the most important points to consider while installing an air conditioner is to understand whether the wall of the room is strong enough to hold the unit.
2. Appropriate height
The height from the ground and the positioning is an important factor. The indoor unit should be placed in such a manner so that it doesn’t restrict the airflow.
3. Adequate space between the appliance and the wall
There must be adequate space between the indoor unit and the wall (15 cm approx.) so that the airflow is not restricted.
4. Placement of the outdoor unit
The outdoor unit has components like fan motor, compressor, condenser, etc., so it is important to install it in a safe place. The outdoor unit must be placed strategically so that it can rest upon a flat surface and away from direct sunlight. If the unit is not placed on a flat surface, it may vibrate and this would damage the condenser, copper pipes and result in coolant leakage. If you’re looking for AC Installation, Palm Beach in Florida is the best place to visit.
5. Proper tilt angle of the appliance
The indoor unit clings with an aluminum bracket, and the bracket must be placed in such a manner that it keeps the machine in an angular position. If the appliance is not properly positioned, it may cause condensed water to store inside the machine and you may face indoor leakage problems.
6. Proper distance between the indoor and outdoor unit
The coolant flows between the two units through the copper pipes, and a little bit of the coolant escapes in the atmosphere. To reduce this coolant loss, the distance between the outdoor and indoor units should be kept minimum. The maximum distance between the two units should be approximately 15 meters.